Ir a la página inicial
0,00 €*

TRAVELSCOOT Smart Luggage Kit f. Escape & Shopper Cruiser

79,50 €*

Precios con IVA incluido, más gastos de envío

En stock ✓, prueba posible en la tienda 🗸, plazo de entrega:
- para envío....tras las🎄vacaciones a partir del 07.01.2025: 2-5 días
- con recogida tras las🎄vacaciones a partir del 07.01.2025: directo 🗸

Variante
Número de producto: 13927.4

Información sobre el producto "TRAVELSCOOT Smart Luggage Kit f. Escape & Shopper Cruiser"

Juego de portaequipajes para fijar una cantidad máxima de equipaje al TRAVELSCOOT Escape & Shopping Cruiser.

Consta de:

Riel adaptador (para acomodar la plataforma de almacenamiento frontal)
Plataforma de almacenamiento (perfil en forma de L para sujetar el equipaje en la parte delantera)
Pieza de plástico en forma de omega (estabiliza el equipaje en la parte delantera de la columna de dirección)
Dispositivo de arrastre de maletas enrollables (para fijar las maletas enrollables a la parte trasera - respaldo)
Sistema de correas para amarrar el equipaje

Los componentes individuales del juego también pueden adquirirse (véase Variaciones)
Las maletas y bolsas de viaje que aparecen en la imagen no forman parte del juego.

Traducción realizada con la versión gratuita del traductor www.DeepL.com/Translator

••• CATEGORÍA DE PRODUCTOS: ACCESORIOS DE VIAJE
| Fabricante "TRAVELSCOOT"

TravelScoot Hartmut Huber

Grovestrasse 2

D-80997 München

E-Mail: international@travelscoot.com


Bitte geben Sie eine valide E-Mail Adresse ein.
Bitte geben Sie eine valide Frage ein.
Mit * gekennzeichnete Felder sind Pflichtfelder.

Frage : Hi, What parts are included in support platform front?
Von : einem Kunden

Antwort des Shopbetreibers:

Dear, all parts except the hook for the luggage on the rear - back rest.

TravelScoot Smart Luggage Kit’ Instruction manual 

LuggageKit.jpg

1) Remove part (see arrow) S 
2) Insert the adapter rail (B) into the U-shaped basket holder so that the smooth side is at the back. B, N The two small screws act as locking pins. The two small screws act as locking pins and are inserted into the holes m 74 
3) Slightly loosen the round-head screws and remove the the angled storage platform (A) with the keyhole with the keyhole openings over the screw heads and and lower it into the slot. Tighten the screws tighten the screws.
4) Snap the omega-shaped plastic part (spacer holder) (C) over the steering column and attach the aluminium tube strip (C) to it with the Velcro surfaces. 
5) Attach the two short straps (D) to the case handle. 
6) Attach the longer strap (E) with the Velcro surfaces to the Traveiscots on the handle. the spacer holder = (©) and strap (E) and stow them in your hand luggage. 
7) Move the TravelScoot handlebars to the top position and lock the lifting clamp. Place the suitcase on the storage platform (A) and secure it with the short straps the short straps (D) around the top of the steering column so that the suitcase firmly against the spacer (C). The cables leading to the to the control elements must be free and the handlebars must remain rotatable. If this is not possible, the case does not comply with the IATA dimensions. Hold the belt over the case from below and tighten the belt clamp. tighten. . 
8) screw the rolling suitcase pulling device (F) onto the backrest holder as far down as possible, ' 
9) Hang up the wheeled suitcase. After sitting on the seat another piece of luggage under the seat ) Shopping br 
10) Loop the straps (6) into the handles of the crate and mark the top edge of the box in the centre. -p 8 17) Lift the crate onto the storage platform (A) so that the mark with the control column, loop the straps (G) around the Omega around the Omega spacer (C) and fasten, Tighten the belt tensioners firmly. The two strong luggage 17] Attach the two strong rubber straps (H) to the box and to the cane/crutch holder. and on the cane/crutch holder. These act as tilt dampers. > 'Attention: A crate as in step 
11.) can be filled with approx. 20 kilos, but care must be taken with regard to weight. However, care must be taken with regard to the weight. As the Travelscoot itself only weighs 16 kilos, there is a risk that the entire loaded structure will fall over the loaded structure could tip over the front wheel. For this reason, additional containers should be carried on the rear TravelScoot frame and these should be filled first as a counterweight. be filled first. Important: If the loaded crate is to be removed, it must be held and lifted by a second person. be held and lifted by a second person before the belt buckle is opened and the luggage the rubber straps (H) are removed 
12) Extra belt (} for any use ee == Sams ÜravelScoot’ Translated with www.DeepL.com/Translator (free version)

Este sitio web utiliza cookies para garantizar la mejor experiencia posible. Más información...